rightpricebattery.com
Free Shipping on all Orders. No Minimum Purchases Required
SPS (SG-RBC2PHR) APCRBC2PHR High Rate Replacement Battery Cartridge for BP280
SPS (SG-RBC2PHR) APCRBC2PHR High Rate Replacement Battery Cartridge for BP280
(No reviews yet)
Write a Review
SPS
- SKU:
- SGRBC2PHR_1_1_S1391
- UPC:
- 681827853132
- Condition:
- New
- Availability:
- Usually Ships in 24 hours
- Weight:
- 5.30 LBS
- Shipping:
- Free Shipping
- Volt:
- 12 V
- Capacity:
- 9 Ah
- LENGTH:
- 5.94 IN
- WIDTH:
- 2.56 IN
- HEIGHT:
- 3.96 IN
- Weight:
- 5.3 LBS PER UNIT
- TERMINAL:
- T2
MSRP:
$80.00
$40.00
(You save
$40.00
)
SPS Brand APCRBC2PHR (SG-RBC2-PHR) High Rate Replacement Battery Cartridge for BP280
Key Features
- High Rate Performance: Designed for UPS systems like the BP280, it uses a 12V 9Ah High Rate sealed lead acid battery optimized for higher loads over short durations-perfect for mission-critical backup and surge protection.
- Plug & Play Installation: Delivered fully assembled, charged, and ready for installation-replace your old cartridge in just minutes with zero hassle.
- Superior Quality & Freshness: Built with fresh, voltage-matched batteries from ISO-certified factories. Shipped fast and protected with a 1-year full warranty.
- Model-Specific Compatibility: Specifically built as a high-rate replacement for APCRBC2 and tested for use in the BP280 UPS system.
Product Description
Upgrade your BP280 UPS with the SPS Brand APCRBC2PHR (SG-RBC2-PHR) High Rate Replacement Battery Cartridge. Built for high-demand environments, it features a 12V 9Ah High Rate SLA battery that handles power surges and delivers extended runtime more efficiently than standard alternatives. Ideal for demanding IT and industrial power systems, this unit installs in minutes with no assembly or tools required.
Technical Specifications
| Specification | Details |
|---|---|
| Battery Type | Sealed Lead Acid (SLA), High Rate, Rechargeable |
| Voltage | 12V |
| Capacity | 9Ah (36W @ 15min-rate to 1.67V/cell @ 25℃) |
| Maximum Discharge Current | 135A (5 seconds) |
| Dimensions | 5.94 x 2.96 x 3.96 inches |
| Weight | 5 lbs |
| Terminal Type | T2 |
| Design Life | 3-5 years at 77℉ (25℃) |
| Warranty | 1 year full warranty |
Compatible Model
- BP280 UPS
Comparison Table: APCRBC2 vs. APCRBC2P vs. APCRBC2PHR
| Feature | APCRBC2 (Standard) | APCRBC2P (High Capacity) | APCRBC2PHR (High Rate) |
|---|---|---|---|
| Battery Type | Standard SLA | Standard SLA | High Rate SLA |
| Voltage | 12V | 12V | 12V |
| Capacity | 7Ah | 9Ah | 9Ah |
| Max Discharge Current | Standard | Standard | 135A (5 sec) |
| Runtime | Standard | Extended | Extended + Surge |
| Best For | Typical loads | Longer runtime | Critical loads / Surges |
| Plug & Play | Yes | Yes | Yes |
| Warranty | 1 Year | 1 Year | 1 Year |
Key Differences
- APCRBC2: General-purpose 7Ah battery suitable for standard UPS usage.
- APCRBC2P: Higher 9Ah capacity for extended runtime under moderate loads.
- APCRBC2PHR: 9Ah High Rate battery designed for peak load handling and high surge environments like the BP280 UPS.
Important Notes
- Batteries are heavy; confirm compatibility before purchasing.
- California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
- APC® is a registered trademark of Schneider Electric IT Corporation. This product is not affiliated with or endorsed by Schneider Electric.
Customer Support
Have questions about installing this battery in your BP280 UPS? Our expert support team is ready to help.
